Laser
Cut Parts for the Jetco SHARK 15 Control Line Model Airplane.
Laser/CNC Router parts drawn from the original Jetco Plans Plans -
36.5" Wingspan for .15-.25 Engines
Brand New Short Kit gives us scratch-builders a head start
SHORT KIT - NOT A COMPLETE KIT - DO NOT EXPECT MORE THAN WHAT IS LISTED
IF YOU ARE UNSURE WHAT A SHORT KIT IS THEN PLEASE DO NOT ORDER THIS ITEM
This
short kit includes all the unique precision laser cut balsa parts. You
will still need hardware and stock balsa to complete the model.
I drew this in CAD for a fellow control line flyer... and decided to add it to my library of kits I will produce.
Included are all the unique parts. Plans are available free to download from the internet (like Outerzone Shark 15 (oz8148)) but full size paper plans are also an option.
This listing is for my services
to procure the materials, draw the parts in the CAD program and then
cut them out on the CNC laser or CNC router machines as needed. I make no claim to the design of the plane or the original drawings.
What is included for my services are the following physical parts.
Two 3/16" Fuselage sided you laminate to make one strong and perfectly straight 3/8" thick fuselage
Fifteen 1/16" thick wing ribs
Twelve 1/16" wing tip supports
Left and Right 1/8" Plywood Fuselage Doublers
One 1/8" plywood bell-crank platform
Two 1/8" wing tips (marked for support placements)
One1/8" Balsa Stabilizer
Two 1/8" Balsa elevators
Two 1/8" Balsa Turtle-deck sides
One 1/8" Balsa Canopy
1/8" Balsa Dorsal Fin and Rudder
Two 1/8" Balsa stationary flaps (with option for working flaps)
OPTIONAL PAPER PLANS can be selected for nominal charge (for printing)
Items NOT included but you may need to complete the model:
3/8" SQ Leading Edge
1/16" x 1" Trailing Edge (top and bottom)
1/16" x 6 x 8" sheeting for top and bottom of wing center
2" Bell- Crank and mounting hardware
1/8" dia tubing for lead-out guides
1/16" x 1/8" x 36 (cut to fit) trailing edge strip
1/2 ounce wingtip weight
1/32" dia Lead-out wire
1/16" dia Control push rod
Elevator control horn
Elevator (and optional flap) hinges
3/8" SQ hardwood motor mount material
Landing gear wire 3/32 approx. 8 to 10”
One pair of 1-3/4” wheels (3/32” axle or drill out to fit)
engine and fuel tank
and of course finishing material of your choice
Please ask any questions before purchasing.
If you need an obsolete plane kit or
parts not in any of my current listings, just message me. I am always
adding to the library.
